It's Funny Because It's Racist

Spent most of the afternoon cleaning off the crankshaft, heads, timing gears, caps and timing chain.  As with the engine block, you need to make sure the heads are free of debris before fitting them to the engine to ensure no nasty bits of metal or rust knock around the inside of the engine and generally wreak havoc.
While I was out there one of my new neighbors came out to chat with me and talk shop a bit.  He just got an old Chevy he's been wrenching on.  We started chatting about work and places we used to live when eventually he said something like, "At my old place I couldn't leave my tools out too long, cause my neighbors there were Hispanic."

Oh boy... so I told him that I am Hispanic and he back pedals away from what he said.

The issue isn't that he's racist, as I suspect most of us are.  The issue is that he doesn't know that he's racist.  I mean, you probably have some biases too (https://implicit.harvard.edu/implicit/demo/selectatest.html), Lord knows I do.  But to not know about them is the worst kind of mistake.  Like an engine, you can't fix what you don't know is wrong.

My neighbor was probably just associating visible crimes with people of color, which is probably a fair association.  People of color are generally poorer than white counter-parts and poor people generally commit the more visible kinds of crimes (theft, fights, disorderly conduct etc.).  White people commit crimes too, but they are of the "download movies illegally", or "abuse my family", or something like that.  Those kinds of crimes are not as visible and go unnoticed by society and therefore don't get the stigma that "people of color" do.

Aside: that's really a dumb phrase, "people of color".  It just implies that "white" is "normal" and "other" requires some kind of additional nomenclature.  Everyone has a color.

In any case, as I told my neighbor: trash comes in all colors.


Keep Calm and Carry On

Spoke to The Machinist about my crack.  His conclusion: not important, keep going.
Also he suggested putting a stud in the hole with some thread-locker for added protection.

Next step, I need to get a set of push-rods and rocker arms so I can test assemble the rotating package.

From bottom-left clockwise to bottom-right: Engine valves, valve springs, rocker arm, push-rod, lifters, cam shaft.

And from there, I need to get a hold of some solid lifters, as mine are hydraulic and the spring-tension in the valve springs is too high to use hydraulic lifters in test fitting... that probably sounds confusing, let me see if I can find a video that explains what I mean. Yup here is one:
So... car people, what kind of rods/rockers do I get?


You Never Wash Up After Yourself

I know, I know... I said it was "business time" and I didn't do anything. Well, I was busy. I went to Germany and was generally occupied with life. But tonight, I cleaned the engine block for test-fitting.

To do this, first I had to assemble the necessary cleaning elements:
Lacquer thinner, carb cleaner, WD-40, Chem-dip, engine oil, engine brush kit, a bucket and various rags.
Also I had to hook up my newest purchase, a siphon sprayer:
You see the block needs to be real clean before you put any parts on it. Like, no dirt, and try to get all the rust off too. Just a few specks of dirt in the wrong place, then when you wind the engine up to 6k and things get all hot, and you could really do some serious damage to all those moving parts. So, the engine needs to be real clean.

First you hit it with the lacquer thinner. Use a stiff bristle brush and really give it a once over. Then stick the the siphon part of the siphon sprayer in the lacquer thinner (the long blue hose is connected to the air compressor) and spray air/solvent into the nooks and crannies of the engine.

Once you do all that, it's time to get the engine brushes out and clean out all the passages for the oil and water that flow through a healthy engine.

Then it's time to brush the cylinder walls. You're supposed to put lacquer thinner on a rag and wipe down the cylinder, then use the biggest engine brush (you can see a bit of it in the picture above) and keep washing it down with solvent as you brush. Then check the cylinder with a white towel and make sure you don't see any residue left. Mine were pretty dirty/rusty:
After they are all clean, coat them with WD-40. Next use a really soapy solution of water and laundry detergent to once again clean out the block; then hit it with the siphon sprayer. This time blow soapy water though. Then use the small engine brushes to clean the fiddly parts (oil galleries etc.). Finally rinse the soap off, spray with WD-40 and run your fingers though the engine looking for any sign of dirt.
If you find any (I did the first time). Redo the soap wash steps and check again.

Finally my engine block was clean.
HOWEVER, I did find a crack in the block. I'm not sure if it's a big deal because it's in a bolt hole that is on the front right of the engine. Look at the following diagram, the bolt-hole in question would be the one on the bottom right of the picture.
Here are pictures of it:
So, car people: is this a deal breaker for the engine block? Do I need a new one, or can I proceed?
(Here's a song for you while you answer)